FrSky X4RSB 3/16CH Telemetry Receiver with Futaba SBUS 16 Channels Smart Port
0

FrSky NPH-01213 - Lighter weight and physically smaller than D8R-II & D6FR. Two selectable failsafe setting options - native failsafe or user programmable failsafe. S. Bus port is compatible with futaba S. Bus servos and frsky SBUS&CPPM compatible servo. External analog telemetry port AD2. Description: brand name: frsky     item name: FrSky X4RSB 3/16ch Telemetry Receiver Dimension: 40*22.

FrSky X4RSB 3/16CH Telemetry Receiver with Futaba SBUS 16 Channels Smart Port - 5*6mm l x w x h Weight: 5. 8g operating Range: full range >1. 5km operating Voltage Range: 4. 0~10v operating current: [email protected] number of channels: 3/16ch 1~3ch from conventional channel outputs, 1~16ch from SBUS channel Compatibility: FrSky X-series Module XJT etc. Taranis x9d in d16 modex4rsb is not work with D-series Module Rssi pwm output.

More information about FrSky NPH-01213

FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S


FrSky SG_B01HZB6XTI_US - FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S - The xsr is smartport enabled and has S-bus as well as CPPM outputs. The xsr does not support fbvs nor PWM and the antennas are soldered on instead of utilizing IPX connectors. Operating current: [email protected] Number of channels: 16S-Bus : 8CPPM. Rssi output: analog voltage output 0~3. 3v. However we needed to give some things up so it could be smaller.

Weighing in at 4. 3 grams including connection cable and smaller than the X4R, this little receiver is a great choice for micro multirotors. Operating voltage: 4 - 100v. Operating range: >1. 5km full Range.

More information about FrSky SG_B01HZB6XTI_US


Similar products



FrSky Taranis X9D Plus 16-Channel 2.4ghz ACCST Radio Transmitter for RC Drone FPV Racing - Mode 2 Left Hand Throttle


FrSky x9d - Specifications: model name: taranis x9d plus number of channels: up to 16 channels operating voltage range:6~15v 2s, 2 color combinations for select model memories: 60 extendable by SD card Compatibility: FrSky X series, 3S Lipos are acceptable Operating Current: 260mA maximum both RF module and backlit are on Operating Temperature: -10~60 Backlight LCD Screen: 212*64, D series and V8-II series receivers plus other receivers if an external module is used Taranis X9D Plus-EU version is only compatible with X series receiver EU version.

FrSky Taranis X9D Plus 16-Channel 2.4ghz ACCST Radio Transmitter for RC Drone FPV Racing - Mode 2 Left Hand Throttle - Up to 16 channels,four ball bearing gimbals,Two-module two-frequency system. Three selectable modes,. Upgrade the firmware by using SD card directly, no need to install any driver. Rssi output: analog voltage output 0~3. 3v. Operating range: >1. 5km full Range. Operating current: [email protected] Features: quad ball bearing Gimbals Receiver Match Audio Speech Outputs values, settings, alarms, etc.

Real-time flight data logging receiver signal strength indicator RSSI Alerts Super Low Latency Smart Port Supported Vibration Alerts Number of channels: 16S-Bus : 8CPPM. Operating voltage: 4 - 10

More information about FrSky x9d


Similar products



FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Radio Controller White for RC Drone


FrSky - Specifications: model name: taranis q x7 operating voltage range: 6~15v 2s, 3s lipos are acceptable operating current: 210ma maximum both rf module and backlit are on Operating Temperature: -10~45℃ Backlight LCD Screen: 128*64 outdoor readable LCD Model Memories: 60 extendable by SD card Compatibility: FrSky X series, D series and V8-II series receivers plus other receivers if an external module is used Number of channels: 16S-Bus : 8CPPM.

And of course a module bay for use with jr-type modules that can be used with other protocol receivers and with the use of a FrSky XJT module this radio can support up to 32-channels. Smart port supported, haptic,Receiver match, usb, RSSIReceiver signal strength. Audio speech outputvalues, alarms, settings, etc,Real time flight data logging,Vibration alerts.

Including:1 x taranis x9d plus transmitter 1 x 2000mah battery 1 x Charger 1 x manual. Super low latency vibration alerts Model configuration files compatible with TARANIS X9D Plus. Equipped with an audio jack output and trainer port as well. It runs on opentx and files can be shared with the popular X9D Plus.

FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Radio Controller White for RC Drone - This is the latest powerful radio system from FrSky, the Taranis Q X7. Both sticks come with spring loaded return to center sticks, this makes changing from mode 1 to mode 2 extremely easy to set through the menu and the stick can quickly be set to a stationary throttle by unscrewing four screws and removing a spring.

Wheel and center enter button makes navigating the backlit menu easy and precise.

More information about FrSky


Similar products



FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver


FrSky NPH-01266 - Rssi output: analog voltage output 0~3. 3v. Operating current: [email protected] Operating range: >1. 5km full Range. For 8 channels in d8 mode you can use the frsky Taranis or XJT, DFT, DJT, DHT and DHT-U modules. Smart port supported, usb, Haptic,Receiver match, RSSIReceiver signal strength. Audio speech outputvalues, alarms, settings, etc,Real time flight data logging,Vibration alerts.

Including:1 x taranis x9d plus transmitter 1 x 2000mah battery 1 x Charger 1 x manual. With rssi pwm output 0~3. 3v smartport enabled, realizing two-way full duplex transmission. What's in the box: 1 x x8r 2 x short tool 1 x Manual Number of channels: 16S-Bus : 8CPPM. With rssi pwm output 0~3. 3v. Or you can use 2 x8r receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second.

FrSky Taranis Compatible Receiver X8R 8-Channel 2.4ghz ACCST&RSSI&SBUS Easy to Use Receiver - The x8 protocol is also backward compatible! In D8 mode it work with the DHT, DJT, DFT and DHT-U transmitter modules. Parallel two x8R to become a 16 channel receiver. The x8r is in a smaller package then previous 8 channel receivers, but has so much more capability. Features: more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

More information about FrSky NPH-01266


Similar products



iFlight 10pcs Plastic Protection Antenna Tube with Caps for FRSKY XM XM+ X4R X4RSB S6R/D Series/TF Series IPEX4 Receiver Antenna Black


iFlight - Real-time flight data logging Receiver Signal Strength Indicator RSSI Alerts. Three selectable modes,. Upgrade the firmware by using SD card directly, no need to install any driver. Up to 16 channels,four ball bearing gimbals,Two-module two-frequency system. Note: frsky taranis q x7 defualt package aren't include the battery and battery trays.

New version with a Charing port on the side and no longer includes a battery tray. Multiple battery options: battery: 800mah nimh/ 1800mah lsd nimh/ 2s lipO Battery Optional Accessories Charger: FCX07 Li/NiMH Dual Mode Charger Optional Accessories. Compatibility: frsky x series, D series and V8-II series receivers plus other receivers if an external module is used.

iFlight 10pcs Plastic Protection Antenna Tube with Caps for FRSKY XM XM+ X4R X4RSB S6R/D Series/TF Series IPEX4 Receiver Antenna Black - Usually the receiver antenna is soft and fragile, with the protection tube, you don't need to worry the propeller may cut down the antenna. Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

All 16 channels requires the frsky taranis, djt, or the xjt module bound in d16 mode. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DFT, DHT and DHT-U modules. Suit for fpv racing quadcopter frsky receiver 2.

More information about iFlight


Similar products



Tattu 4S 1300mAh LiPo Battery 75C 14.8V Pack with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV Skylark Emax Nighthawk 250


Tattu TA-75C-1300-4S1P - Good strut for transmitter antenna, durable yet flexible. Usually the receiver antenna is soft and fragile, with the protection tube, you don't need to worry the propeller may cut down the antenna. Real-time flight data logging Receiver Signal Strength Indicator RSSI Alerts. Number of channels: 16S-Bus : 8CPPM.

For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DFT, DHT and DHT-U modules. Suit for fpv racing quadcopter frsky receiver 2. 4g antenna line ipex4 antenna. 3. All rights Reserved by Gensace&Tattu. It help making receiver antenna fixed proper angle to achieve best signal. Operating voltage: 4 - 10

Tattu 4S 1300mAh LiPo Battery 75C 14.8V Pack with XT60 Plug for RC Boat Heli Airplane UAV Drone FPV Skylark Emax Nighthawk 250 - 0v. Operating current: [email protected] Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, djt, or the xjt module bound in d16 mode.

Three selectable modes,.

More information about Tattu TA-75C-1300-4S1P


Similar products



EUDAX FPV Black Sponge Mat Landing Skid Pad Gear Anti-Vibration Shockproof Foam Sticky Tape for rc multirotor Quadcopter Racing Copter Drone Mini-Quad 60 Pcs


EUDAX EUDAX-JZM-60 - Up to 16 channels,four ball bearing gimbals,Two-module two-frequency system. With rssi pwm output 0~3. 3v. Tattu professional lipo Battery; Superior Japan and Korea Lithium Polymer raw materials. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. Parameter: weight, 155g; dimensionl*w*h, 72*36*29.

4mm; connector, XT60 Plug. Applications: nemesis 240 mini, qav180/210, hovership mhq2 270, zmr 250, vortex 285, mojo 280, hovership mhq2, indy250 plus, emax nighthawk 250, zmr 250, Skylark M4-FPV250, Mini H, Emax Nighthawk 250, danaus, mini shredder 200, flip fpv frame, qav250, mini h, etc. What you get: tattu lipo battery pack with XT60 Plug & Local after-sales service located in Dublin, CA.

Super light, strengthen shockproof, Anti-Static. Insulation effect, keeping the antennas out of harm away while not breaking in a crash. Ultralight eva shockproof mounting pads, 11±1mm thickness, Resure stable structure and avoid scratch for multicopter flight. Soften the airframe during touch downs, guarantee better than aluminum column landing gear.

EUDAX FPV Black Sponge Mat Landing Skid Pad Gear Anti-Vibration Shockproof Foam Sticky Tape for rc multirotor Quadcopter Racing Copter Drone Mini-Quad 60 Pcs - Usually the receiver antenna is soft and fragile, with the protection tube, you don't need to worry the propeller may cut down the antenna. Real-time flight data logging Receiver Signal Strength Indicator RSSI Alerts. Super low latency vibration alerts Model configuration files compatible with TARANIS X9D Plus.

More information about EUDAX EUDAX-JZM-60


Similar products



HOBBYMATE XT60 PDB Power Distribution Board - Support 3-6S Input, 5V/12V Output Support The LC Filter 3030mm Mount


HOMEMART - Compatibility: frsky x series, D series and V8-II series receivers plus other receivers if an external module is used. Real-time flight data logging Receiver Signal Strength Indicator RSSI Alerts. Operating voltage: 4 - 100v. Operating range: >1. 5km full Range. Super low latency vibration alerts Model configuration files compatible with TARANIS X9D Plus.

Parallel two x8R to become a 16 channel receiver. Smartport enabled, realizing two-way full duplex transmission. More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. All 16 channels requires the frsky taranis, djt, or the xjt module bound in d16 mode.

HOBBYMATE XT60 PDB Power Distribution Board - Support 3-6S Input, 5V/12V Output Support The LC Filter 3030mm Mount - Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 05a the output power for quadcopter camera, VTX, Receiver, Led Board and osd. Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time. 5v output is designed for flight controller, Receiver, VTX, OSD. Three selectable modes,.

Upgrade the firmware by using SD card directly, no need to install any driver. For 8 channels in d8 mode you can use the FrSky Taranis or XJT, DFT, DHT and DHT-U modules.

More information about HOMEMART


Similar products



SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2


onelinkmore OL0444-X - Great for mini quads from 180mm to 300mm in size, great replacement pads for quadcopters like QAV210 QAV250 QAV-R 180 220 260 Operating current: [email protected] Rssi output: analog voltage output 0~3. 3v. Up to 16 channels,four ball bearing gimbals,Two-module two-frequency system. Height:11±1mm, length:30mm, width:15mm, color:black.

Pack list: 60 pcs. Hobbymate fpv drone pdb make the connection easy between the flight controller and PDB board and to the esc, what's more is if you don't have a socket for esc's, you can also solder the esc on the PDB board easy and make the building clean and clear. Soften the airframe during touch downs, guarantee better than aluminum column landing gear.

SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2 - Operating range: >1. 5km full Range. Hobbymate xt60-pdb was integrated bec 5v 3a the 12v 05a the output power for quadcopter camera, Receiver, VTX, Led Board and osd. Made of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time. 5v output is designed for flight controller, VTX, Receiver, OSD.

Usually the receiver antenna is soft and fragile, with the protection tube, you don't need to worry the propeller may cut down the antenna. Note: frsky taranis q x7 defualt package aren't include the battery and battery trays.

More information about onelinkmore OL0444-X


Similar products



Makerfire FCHUB-6S w/ Current Sensor PDB Power Distribution Board BEC 5V/1.5A 10V/1.5A Current Sensor 184A for FPV Racing Drone Quadcopter Martian QAV X 250 210 220 180 150


Makerfire pcb board - Up to 16 channels,four ball bearing gimbals,Two-module two-frequency system. Operating current: [email protected] Usually the receiver antenna is soft and fragile, with the protection tube, you don't need to worry the propeller may cut down the antenna. The connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency.

Makerfire FCHUB-6S w/ Current Sensor PDB Power Distribution Board BEC 5V/1.5A 10V/1.5A Current Sensor 184A for FPV Racing Drone Quadcopter Martian QAV X 250 210 220 180 150 - Specification: brand name: matek model: fchub-6s item Name: Power Distribution Board Built-in Current Sensor Size: 36x36mm 305x305mm hole mounting, M3 Weight: 8. 5g bec output: 5v & 10v 5v bec output: - designed for RC Receivers, Flight Controllers, OSD and Servos. 2. 0a 10s/minute - short-circuit tolerant 2 seconds/minuate 10V BEC Output: -Designed for VTX or FPV Camera - Voltage: 10

0v 9. 8-102 dc - current: 1. 5a max. With rssi pwm output 0~3. 3v. Bec 10v/1.

More information about Makerfire pcb board


Similar products