Top 10 Clock Movement Mechanism – Clocks
0
As an Amazon Associate I earn from qualifying purchases.
6-3. 7mm, and the Hour Shaft Diameter is 5. 5mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. Warm tip: this model is an ordinary shaft of 5mm, the measured length may be slightly different from the actual, which is suitable for clocks whose backplane thickness does not exceed 4mm, otherwise the nuts on the front cannot be tightened.

Good handwork diy clock material: suitable for repairing, replacing or making a clock, replacement for large and thick clock frame. With metal hook: long spindle quartz clock replacement movement parts with metal hook, it can be hung on the wall via nail directly.

Center of hole hand size: hour hand is approx. 90 mm 3. 5 inch; minute hand is approx. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel.

Simple style clock movement: it can match to diverse colors, shapes clock panel, patterns, it will not stand out, good movement will work well. Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away.


170 mm 6. 7 inch; minute hand is 243 mm 9. 6 inch; Second cap: approx. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.


Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1.


1. ULTNICE
#ad
ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts
#adULTNICE #ad - Hour shaft Length: 108mm. Due to different measuring tools and measuring methods, thank you for your understanding ! ! !). Diameter: the minute shaft diameter is 3.6-3. 7mm, and the Hour Shaft Diameter is 5. 5mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. Warm tip: this model is an ordinary shaft of 5mm, the measured length may be slightly different from the actual, which is suitable for clocks whose backplane thickness does not exceed 4mm, otherwise the nuts on the front cannot be tightened.
More information #ad
The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps. Cannot Use Rechargeable Batteries. Minute shaft Length: 14mm. Screw shaft Diameter 7. 6mm. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2.Brand | ULTNICE #ad |
Manufacturer | ULTNICE #ad |
Height | 0.63 Inches |
Length | 2.2 Inches |
Weight | 0.02 Pounds |
Width | 2.2 Inches |
Part Number | 21F2118PVNU |
More information #ad
2. Mudder
#ad
Mudder Long Spindle Quartz Clock Movement, 1-1/10 Inch Total Shaft Length, 3/5 Inch Maximum Dial Thickness
#adMudder #ad - Delicate design: black water drop shape, it looks elegant, simple, replacement part suit well to different styles clock frame. Compatible clock: applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, craft clock, etc.Good handwork diy clock material: suitable for repairing, replacing or making a clock, replacement for large and thick clock frame. With metal hook: long spindle quartz clock replacement movement parts with metal hook, it can be hung on the wall via nail directly.
More information #ad
Size: total shaft length: 28 mm 1-1/ 10 inches, thread length: 204 mm 4/ 5 inches; jump second movement, suitable for 12 - 16 mm 12/ 25 - 5/ 8 inches thickness clock panel. Note:please check the size of the clock movement and pointer below prior to purchase to verify whether it can fit over your clock.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Height | 0.63 Inches |
Length | 2.17 Inches |
Weight | 0.15 Pounds |
Width | 2.17 Inches |
Part Number | HK00E4725 |
Model | 8541847135 |
More information #ad
3. Mudder
#ad
Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black
#adMudder #ad - 120 mm 4. 7 inch; Second caps is approx. Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.Center of hole hand size: hour hand is approx. 90 mm 3. 5 inch; minute hand is approx. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel.
More information #ad
Wide application: they are fit for cross-stitch, three-dimensional embroidery, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, craft clock, etc.7 mm 028 inch. Warm notice: when you install it, please keep the hour hand and minute hand parallel.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Weight | 0.09 Pounds |
Part Number | 43216-77972 |
More information #ad
4. Mudder
#ad
1/2 Inch Maximum Dial Thickness, Mudder Long Spindle Quartz Clock Mechanism, 9/10 Inch Total Shaft Length Red
#adMudder #ad - Wide application: you are enable to use it to repair, three-dimensional embroidery, replace or make a clock; Applicable to cross-stitch, craft clock, frameless draw clock, etc.Simple style clock movement: it can match to diverse colors, shapes clock panel, patterns, it will not stand out, good movement will work well. Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away.
More information #ad
Note: this clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel. Jump second movement, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel; Total shaft length: 23 mm 9/ 10 inches, thread length: 15. 4 mm 3/ 5 inches.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Height | 0.63 Inches |
Length | 2.17 Inches |
Weight | 0.08 Pounds |
Width | 2.17 Inches |
Part Number | Mudder-Quartz Clock-01 |
More information #ad
5. Mudder
#ad
Mudder Silence Quartz Clock Movement, 4/5 Inch Total Shaft Length Black, 11/25 Inch Maximum Dial Thickness
#adMudder #ad - Diy quartz wall clock replacement movement parts. Applicable to cross-stitch, craft clock, three-dimensional embroidery, frameless draw clock, etc.More information #ad
Mute scanning movement, suitable for 8 - 11 mm 3/ 10 - 11/ 25 inches thickness clock panel. Total shaft length is 20 mm 4/ 5 inches, thread length 14 mm 3/ 5 inches. Suitable for repairing, replacing or making a clock.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Height | 0.63 Inches |
Length | 2.17 Inches |
Weight | 0.12 Pounds |
Width | 2.17 Inches |
Part Number | HK00E1554 |
Model | 8541847128 |
More information #ad
6. Mudder
#ad
3D Clock Hands Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories
#adMudder #ad - 50 cm. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. Center of hole hand size: hour hand is approx.170 mm 6. 7 inch; minute hand is 243 mm 9. 6 inch; Second cap: approx. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.
More information #ad
7 mm 03 inch. Home decoration: you can diy a simple clock as wonderful decoration, then hang and stick it on the wall in bedroom, kitchen, living room or office. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minute testing the clock move or not.Brand | Mudder #ad |
Manufacturer | Mudder #ad |
Weight | 0.22 Pounds |
Part Number | Mudder-Wall Clock-01 |
Model | TRTA11A |
More information #ad
7. SNNplapla
#ad
SNNplapla 5-Pack DIY Battery Powered Quartz Clock Movement Mechanism Set
#adSNNplapla #ad - Case size: 52x55x17mm; second Hand Length: 12. 2cm. Powered by: 1 AA Battery. Not included. Color: as picture shown. Package included: 5x Quartz Clock Movement Spindle Set. Material: plastic Case & Metal Hands.More information #ad
Brand | SNNplapla #ad |
Manufacturer | Xiaoqing-US #ad |
Part Number | SHRFAJFOAIJFAFJVA-1 |
More information #ad
8. Hicarer
#ad
Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories
#adHicarer #ad - 70 cm/ 30 inch. 7 mm/ 03 inch,please check the size before purchase. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1.
More information #ad
5 v aa battery not included. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. Center of hole hand size: the hour hand is approx.Brand | Hicarer #ad |
Manufacturer | Hicarer #ad |
Height | 0.79 Inches |
Length | 16.73 Inches |
Width | 3.94 Inches |
Part Number | Hicarer-Clock Movement-01 |
More information #ad
9. Dans Clock Shop
#ad
Hanger, Hands, Fittings, Quartz Tide Tidal Clock Movement Mechanism Motor
#adDans Clock Shop #ad - Rohs approved, Fully tested. Shaft length 16. 8mm - gold thread length 11. 7mm - width 7mm. Metal hanger & all fittings included. Complete with 90mm Black hand which can easily be cut to size with scissors. Movement dimensions - height 70mm 55mm with hanger removed - Width 55mm - Depth 16mm.More information #ad
Brand | Dans Clock Shop #ad |
Manufacturer | Quartz #ad |
Part Number | 604428252029 |
More information #ad
10. Pulsar
#ad
Seiko-SKP Quartz Clock Movement Kit with 5" Black Spade Hands for Dials up to 1/4"
#adPulsar #ad - Size: 2 1/8" Square. Clock movement quartz with Hands, Second Hand, and Wall Hanger. Max dial thinkness 1/4". Threaded shaft length of 5/16", total shaft length of 5/8" Without Second Hand. One set of hands & second hand included Minute hand measures 5" from mounting hole to tip.More information #ad
Brand | Pulsar #ad |
Manufacturer | Seiko-SKP #ad |
Height | 8.2 Inches |
Length | 2.4 Inches |
Weight | 0.02 Pounds |
Width | 1.6 Inches |
Part Number | AX-AY-ABHI-78395 |
Model | AX-AY-ABHI-78395 |
More information #ad